Home > Equipment > Paper Cutters > Hydraulic Cutters

Hydraulic Cutters

A cutter is one of the few machines that a print manufacturer will use on almost every job that passes through their operation. Some jobs get folded, some are drilled or laminated, but every single job passes through the cutter. We talk to our customers about a specific mindset to be in while purchasing a cutter. First of all, consider it a 15 year investment. Cutters are tough machines and most operators will agree that they're often used in production until they're completely worn out. For that reason it's wise to pony up and get a quality machine. Think of the hundreds of thousands of cut cycles the cutter will make over it's lifespan. If the cut cycle is just a couple seconds quicker, it can stretch out to months or years of labor savings over the life of the cutter. Hydraulic cutters vary in duty cycle.

Some use only hydraulics to drive the cutting mechanism and clamp. Others use a combination of hydraulics and kinetic power stored in a heavy flywheel. Flywheel systems allow for quick response without sacrificing torque. Many of your larger cutters, over maybe 36 inches will use a flywheel. Some cutters also have a scrap trap, this is a small trap door right in front of the blade that will open up momentarily after each cut cycle to allow scrap paper to drop down into a bin. This is a minor time saver that really adds up over the life of the cutter. It can also reduce the fatigue of an operator by allowing them to keep focused on the product.

Sort By:
Page of 1
92 TS High-Speed Paper Cutter 115 TS 45" High Speed Paper Cutter
Perfecta 92 TS High-Speed Paper Cutter Perfecta 115 TS High-Speed Paper Cutter
132 TS 52" High Speed Paper Cutter 168 TS 66" High Speed Paper Cutter
Perfecta 132 TS High-Speed Paper Cutter Perfecta 168 TS High-Speed Paper Cutter
225 TS 88.5" High Speed Paper Cutter Challenge Champion 305 TC Programmable Paper Cutter
Perfecta 225 TS High-Speed Paper Cutter Challenge Champion 305 TC Programmable Paper Cutter
Challenge DAEHO Guillotine Paper Cutter Challenge Champion 370 TC Paper Cutter
Challenge DAEHO iCutter Paper Cutters Challenge Champion 370 XT Paper Cutter
Challenge Titan 265 TC Paper Cutter Challenge Titan 230TC Paper Cutter
Challenge Titan 265 TC Paper Cutter
 		Challenge Titan 230 TC
Challenge Titan 200 Paper Cutter Standard Horizon APC-610 Hydraulic Cutter
Challenge Titan 200 Programmable APC-610 Hydraulic Cutter
   
 
A cutter is one of the few machines that a print manufacturer will use on almost every job that passes through their operation. Some jobs get folded, some are drilled or laminated, but every single job passes through the cutter.